|
|
| MODEL NO. |
WK-TGP001 |
INSERTION LOSS |
0.5 dB |
| FREQUENCY RESPONSE |
0-3 dB at 10Mhz |
| INPUT RESISTANCE |
75 ohm |
| OUTPUT RESISTANCE |
75 ohm |
| ISOLATION VOLTAGE |
600VDC (Min) |
| INSULATION RESISTANCE |
100m Ohm |
TRANSIENT VOLTAGE
SUPPRESSORS |
12 Vrms |
| TRANSMISSION DIMENSIONS |
400m-900m |
| BALUN |
V |
| DIMENSIONS |
69×25×22mm |
| MATERIAL |
ABS Black |
FEATURES:
‧BNC male to BNC female with mini cable 15 on both sides.
‧Others same as GL001 Ground Loop Isolator function.
‧Built in Video BALUN, perfect to work with DVR to immunity DVR interference ,
for extra interference rejection.
‧Built in TVS (Transient Voltage Suppressors) for surge protection.
APPLICATION:
‧A ground loop problem may occur at several points in the CCTV system, and each occurrence of the problem must be corrected individually. Loops can occur between a camera and monitor, from a camera to a switcher or one of many other possibilities.
‧Video Ground Loop Isolator could reduce "Ground Loop Interference" with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials, Differences in ground potentials are typically caused by unbalanced power line loads. |
